DMX 8-Way RJ45 Splitters - SIRS Electronics, Inc.
Par un écrivain mystérieux
Last updated 01 juin 2024
The IT-SP8R is an ultra-compact 8 Port RJ45 DMX512 Splitter for use with DMX installations wired with Category 5 (CAT5) cabling. Each output port of the IT-SP8R is an independently protected DMX signal that can be run up to 1,500 feet (500 meters). Since DMX signals cannot be wired in a star network configuration without being re-created by an active splitter, use the IT‑SP8R to branch DMX signals out to DMX devices in multiple locations or to extend the 1,500 foot (500m) maximum distance from the DMX source.The IT-SP8R includes DMX Input and Pass-Thru ports with a handy line termination switch. It also includes a polarity inversion switch that allows the IT-SP8R to internally convert between DMX512 standard wiring and inverted wiring used by Color Kinetics® devices. IT-SP8R| North American DMX 8-Way RJ45 Splitter Includes North American power supply IT-SP8R-AUST| Australian DMX 8-Way RJ45 Splitter Includes Australian power supply IT-SP8R-EURO|UK/Euro DMX 8-Way RJ45 Splitter Includes UK/EURO power supply Features: RJ45 Ports for easy connection in DMX systems that use Category 5 cables DMX Input and DMX Pass-Thru Ports for daisy-chaining multiple splitters 8 Independently generated and protected output ports Each port can drive a DMX line an additional 1,500 feet (500 meters) Port protection circuitry includes Transient Voltage Suppression (TVS) and Self-Resetting Poly-Switch Fuses to prevent a fault on one port from affecting the Input or other output ports Can be used in systems wired for DMX512 or Color Kinetics® devices User-selectable polarity inversion for converting between DMX512 and Color Kinetics® wiring schemes User-selectable input line termination switch Ultra-compact design provides 8 DMX ports just 14in2 (90cm2) Configuration: The IT-SP8R has two user-selectable configuration switches. Termination: The DMX standard recommends that the last device in a DMX chain be properly terminated. If the IT-SP8R is the last DMX device on the DMX network coming from the Lighting Controller, the DMX Termination Switch should be ON. Polarity: There are two primary wiring schemes used for DMX data being carried on CAT5 cabling -- the “standard” DMX wiring, and a different scheme used by Color Kinetics® products. The IT-SP8R has a switch that can be used to invert the polarity of the data from the Input port to the 8 Output ports. If DMX wiring is used on both the input and outputs, or if CK wiring is used on both the input and outputs, then the Polarity switch should be set to Normal. If the wiring on the Input side of the IT-SP8R is the opposite (DMX-to-CK or CK-to-DMX), then the Polarity switch should be set to Invert. CAT5 DMX Wiring: The following chart shows the standard DMX512 usage of each conductor on a CAT5 cable, plus how Color Kinetics® products are wired, and how the IT-SP8R is internally wired in order to accommodate both types of wiring. When the Polarity switch is set to "Normal", the Data +/- signals are passed to the output ports unchanged (as shown in the chart). When the Polarity switch it set to "Invert", the Data +/- signals are reversed when passed to the output ports to effectively convert from the DMX wiring style to Color Kinetics® or vice-versa. Quick Links: DMX 8-Way RJ45 Splitter Data Sheet SKU# DMX-RJ45-SPLITTER
The IT-SP8R is an ultra-compact 8 Port RJ45 DMX512 Splitter for use with DMX installations wired with Category 5 (CAT5) cabling. Each output port of the IT-SP8R is an independently protected DMX signal that can be run up to 1,500 feet (500 meters). Since DMX signals cannot be wired in a star network configuration without being re-created by an active splitter, use the IT‑SP8R to branch DMX signals out to DMX devices in multiple locations or to extend the 1,500 foot (500m) maximum distance from the DMX source.The IT-SP8R includes DMX Input and Pass-Thru ports with a handy line termination switch. It also includes a polarity inversion switch that allows the IT-SP8R to internally convert between DMX512 standard wiring and inverted wiring used by Color Kinetics® devices. IT-SP8R| North American DMX 8-Way RJ45 Splitter Includes North American power supply IT-SP8R-AUST| Australian DMX 8-Way RJ45 Splitter Includes Australian power supply IT-SP8R-EURO|UK/Euro DMX 8-Way RJ45 Splitter Includes UK/EURO power supply Features: RJ45 Ports for easy connection in DMX systems that use Category 5 cables DMX Input and DMX Pass-Thru Ports for daisy-chaining multiple splitters 8 Independently generated and protected output ports Each port can drive a DMX line an additional 1,500 feet (500 meters) Port protection circuitry includes Transient Voltage Suppression (TVS) and Self-Resetting Poly-Switch Fuses to prevent a fault on one port from affecting the Input or other output ports Can be used in systems wired for DMX512 or Color Kinetics® devices User-selectable polarity inversion for converting between DMX512 and Color Kinetics® wiring schemes User-selectable input line termination switch Ultra-compact design provides 8 DMX ports just 14in2 (90cm2) Configuration: The IT-SP8R has two user-selectable configuration switches. Termination: The DMX standard recommends that the last device in a DMX chain be properly terminated. If the IT-SP8R is the last DMX device on the DMX network coming from the Lighting Controller, the DMX Termination Switch should be ON. Polarity: There are two primary wiring schemes used for DMX data being carried on CAT5 cabling -- the “standard” DMX wiring, and a different scheme used by Color Kinetics® products. The IT-SP8R has a switch that can be used to invert the polarity of the data from the Input port to the 8 Output ports. If DMX wiring is used on both the input and outputs, or if CK wiring is used on both the input and outputs, then the Polarity switch should be set to Normal. If the wiring on the Input side of the IT-SP8R is the opposite (DMX-to-CK or CK-to-DMX), then the Polarity switch should be set to Invert. CAT5 DMX Wiring: The following chart shows the standard DMX512 usage of each conductor on a CAT5 cable, plus how Color Kinetics® products are wired, and how the IT-SP8R is internally wired in order to accommodate both types of wiring. When the Polarity switch is set to Normal, the Data +/- signals are passed to the output ports unchanged (as shown in the chart). When the Polarity switch it set to Invert, the Data +/- signals are reversed when passed to the output ports to effectively convert from the DMX wiring style to Color Kinetics® or vice-versa. Quick Links: DMX 8-Way RJ45 Splitter Data Sheet SKU# DMX-RJ45-SPLITTER
The IT-SP8R is an ultra-compact 8 Port RJ45 DMX512 Splitter for use with DMX installations wired with Category 5 (CAT5) cabling. Each output port of the IT-SP8R is an independently protected DMX signal that can be run up to 1,500 feet (500 meters). Since DMX signals cannot be wired in a star network configuration without being re-created by an active splitter, use the IT‑SP8R to branch DMX signals out to DMX devices in multiple locations or to extend the 1,500 foot (500m) maximum distance from the DMX source.The IT-SP8R includes DMX Input and Pass-Thru ports with a handy line termination switch. It also includes a polarity inversion switch that allows the IT-SP8R to internally convert between DMX512 standard wiring and inverted wiring used by Color Kinetics® devices. IT-SP8R| North American DMX 8-Way RJ45 Splitter Includes North American power supply IT-SP8R-AUST| Australian DMX 8-Way RJ45 Splitter Includes Australian power supply IT-SP8R-EURO|UK/Euro DMX 8-Way RJ45 Splitter Includes UK/EURO power supply Features: RJ45 Ports for easy connection in DMX systems that use Category 5 cables DMX Input and DMX Pass-Thru Ports for daisy-chaining multiple splitters 8 Independently generated and protected output ports Each port can drive a DMX line an additional 1,500 feet (500 meters) Port protection circuitry includes Transient Voltage Suppression (TVS) and Self-Resetting Poly-Switch Fuses to prevent a fault on one port from affecting the Input or other output ports Can be used in systems wired for DMX512 or Color Kinetics® devices User-selectable polarity inversion for converting between DMX512 and Color Kinetics® wiring schemes User-selectable input line termination switch Ultra-compact design provides 8 DMX ports just 14in2 (90cm2) Configuration: The IT-SP8R has two user-selectable configuration switches. Termination: The DMX standard recommends that the last device in a DMX chain be properly terminated. If the IT-SP8R is the last DMX device on the DMX network coming from the Lighting Controller, the DMX Termination Switch should be ON. Polarity: There are two primary wiring schemes used for DMX data being carried on CAT5 cabling -- the “standard” DMX wiring, and a different scheme used by Color Kinetics® products. The IT-SP8R has a switch that can be used to invert the polarity of the data from the Input port to the 8 Output ports. If DMX wiring is used on both the input and outputs, or if CK wiring is used on both the input and outputs, then the Polarity switch should be set to Normal. If the wiring on the Input side of the IT-SP8R is the opposite (DMX-to-CK or CK-to-DMX), then the Polarity switch should be set to Invert. CAT5 DMX Wiring: The following chart shows the standard DMX512 usage of each conductor on a CAT5 cable, plus how Color Kinetics® products are wired, and how the IT-SP8R is internally wired in order to accommodate both types of wiring. When the Polarity switch is set to Normal, the Data +/- signals are passed to the output ports unchanged (as shown in the chart). When the Polarity switch it set to Invert, the Data +/- signals are reversed when passed to the output ports to effectively convert from the DMX wiring style to Color Kinetics® or vice-versa. Quick Links: DMX 8-Way RJ45 Splitter Data Sheet SKU# DMX-RJ45-SPLITTER
8 Port DMX Splitter
Essential Install March 2020 by All Things Media - Issuu
Midas, Product
DMX 8-Way RJ45 Splitters - SIRS Electronics, Inc.
Interactive Technologies DMX 8-Way RJ45 Splitter RJ45 DMX Splitter
Monoprice 8P8C RJ45 Straight Inline Coupler, Beige
SIRS Electronics Inc
DMX Splitter RJ45 RDM Swisson XSR
Interactive Technologies IT-SP8R DMX Splitter 8 Way
LED Connex DMX Decoder 12-36V RJ45 4CH 8A
Turn over for cpc's full range - CPC Ireland
Recommandé pour vous
- V-Show 4 Isolated Port DMX Splitter - Branch 4 Way DMX Splitter & Signal Amplifier14 Jul 2023
- V-Show 6 Way Isolated DMX Splitter - 6 Branch Universal Splitter Amplifier Distributor 3Pin Outputs for DMX Signals.14 Jul 2023
- Showtec DB-1-4 DMX Booster / Splitter14 Jul 2023
- DMX Splitter & Booster14 Jul 2023
- DMX & RDM Splitter - DMX & RDM Splitter14 Jul 2023
- Eurolite DMX Split 2 Splitter 3/5-Pol14 Jul 2023
- ENTTEC D-SPLIT 512-Ch DMX 5-pin Splitter/Isolator14 Jul 2023
- Acue 4-Way DMX Splitter14 Jul 2023
- V-Show 1PC 8 Port DMX Splitter For Dj Stage Lights14 Jul 2023
- Elation Professional Netron RDM 6XL DMX Splitter14 Jul 2023
Tu pourrais aussi aimer
- Faitout Inox 28cm 10 L avec couvercle Chef - Lacor14 Jul 2023
- Puma Lot De 3 Chaussettes Sneaker Noires Enfant 35/3814 Jul 2023
- Ampoule Xenon D3S 35W HELLA 8GS 009 028-31114 Jul 2023
- Pompe de surface Multicellulaire 900W Inox KORMAN14 Jul 2023
- Poignée de porte RENAULT Master au meilleur prix - Oscaro14 Jul 2023
- PlayBac Presse14 Jul 2023
- Baton Rouge X6C/ACE MYSTIQUE14 Jul 2023
- Tesla Model 3 Y USB Hub Fast Charge Cable Adapter Docking Station14 Jul 2023
- i.img.com/images/g/31IAAOSwlYlkdaBM/s-l1200.we14 Jul 2023
- Pile CR23A - 12V - WONDER14 Jul 2023